10-32 x 3/8" Button Head Torx Machine Screw SUS304 Stainless Steel

MBT1006S is a 10-32 Button Head head Torx drive screw made of SUS304 Stainless Steel, manufactured by Superneer Limited. It has a length of 3/8 inches and is commonly used in electronics, watches, precision instruments, and 3D printers.

The MBT1006S screw features thread size 10-32, length of 3/8 inches, head type Button Head (head diameter 0.347-0.361 inches), drive type Torx (drive size T25), and is made of SUS304 Stainless Steel.

The MBT1006S screw is made of SUS304 Stainless Steel. Superneer provides material test reports (MTR) and RoHS compliance certificates for all products. SUS304 Stainless Steel offers excellent corrosion resistance and mechanical strength.

The MBT1006S screw has a 10-32 thread. This is a UNC (Unified National Coarse) thread with 10-32 specification, widely used in North American applications.

MBT1006S Button Head head Torx drive screws are used in electronics assembly, PCB mounting, precision instruments, watches, 3D printers, optical devices, medical equipment, and consumer products where reliable fastening with Button Head head aesthetics is required.

The minimum order quantity (MOQ) for MBT1006S is 10,000 pieces. The unit price is $0.073 USD for MOQ quantity. Larger quantities receive discounted pricing. Contact [email protected] for custom quotes.

The lead time for MBT1006S is 15-25 days for production. Shipping to USA takes 5-15 days via sea freight, with shipping cost starting from $50 USD. Air freight is available for urgent orders. DDP and FOB terms are both available.

The 10-32 thread is approximately equivalent to M5 (approx). When substituting inch screws with metric screws, always verify the actual diameter and pitch compatibility.

The MBT1006S uses a Button Head head type. Button Head head provides a specific head design optimized for its intended application. This head type is selected based on the specific application requirements for load distribution, aesthetics, and accessibility.

To choose the right screw: 1) Determine the required thread size based on the tapped hole or nut; 2) Select the appropriate length based on the material thickness; 3) Choose the head type based on clearance and aesthetics; 4) Select the drive type based on torque requirements; 5) Choose the material based on environmental conditions. For MBT1006S (10-32, 3/8 inches), ensure your application requires this specific size.

MBT1006S uses SUS304 Stainless Steel finish, while alternative variants in the same thread/length specification include MBT1006Z (Blue Zinc Plated Steel), MBT1006B (Black Zinc Plated Steel). The SUS304 Stainless Steel of MBT1006S is specifically selected because it offers superior corrosion resistance for outdoor, marine, and humid environments, excellent hygiene properties for food and medical equipment, and good mechanical strength at low cost relative to exotic alloys. This distinction makes MBT1006S the preferred choice when these properties align with your application requirements.