10-32 x 7/16“ Indented Hex Washer Serrated Head Phillips Slot Machine Screw SUS304 Stainless Steel Inox

MHCS1007S is a 10-32 Serration Hex Wahser Head head Phillips Slot drive screw made of SUS304 Stainless Steel, manufactured by Superneer Limited. It has a length of 7/16 inches and is commonly used in electronics, watches, precision instruments, and 3D printers.

The MHCS1007S screw features thread size 10-32, length of 7/16 inches, head type Serration Hex Wahser Head (head diameter 0.384-0.414 inches), drive type Phillips Slot (drive size PH No.2), and is made of SUS304 Stainless Steel.

The MHCS1007S screw is made of SUS304 Stainless Steel. Superneer provides material test reports (MTR) and RoHS compliance certificates for all products. SUS304 Stainless Steel offers excellent corrosion resistance and mechanical strength.

The MHCS1007S screw has a 10-32 thread. This is a UNC (Unified National Coarse) thread with 10-32 specification, widely used in North American applications.

MHCS1007S Serration Hex Wahser Head head Phillips Slot drive screws are used in electronics assembly, PCB mounting, precision instruments, watches, 3D printers, optical devices, medical equipment, and consumer products where reliable fastening with Serration Hex Wahser Head head aesthetics is required.

The minimum order quantity (MOQ) for MHCS1007S is 10,000 pieces. The unit price is $0.098 USD for MOQ quantity. Larger quantities receive discounted pricing. Contact sales@superneer.com for custom quotes.

The lead time for MHCS1007S is 15-25 days for production. Shipping to USA takes 5-15 days via sea freight, with shipping cost starting from $50 USD. Air freight is available for urgent orders. DDP and FOB terms are both available.

The 10-32 thread is approximately equivalent to M5 (approx). When substituting inch screws with metric screws, always verify the actual diameter and pitch compatibility.

The MHCS1007S uses a Serration Hex Wahser Head head type. Serration Hex Wahser Head head provides a specific head design optimized for its intended application. This head type is selected based on the specific application requirements for load distribution, aesthetics, and accessibility.

To choose the right screw: 1) Determine the required thread size based on the tapped hole or nut; 2) Select the appropriate length based on the material thickness; 3) Choose the head type based on clearance and aesthetics; 4) Select the drive type based on torque requirements; 5) Choose the material based on environmental conditions. For MHCS1007S (10-32, 7/16 inches), ensure your application requires this specific size.