10-32 x 7/16" Pan Head Phillips SEMS Screws with Flat Washer Steel Blue Zinc Plated

EFPP1007Z is a 10-32 Pan Head head Phillips drive screw made of Blue Zinc Plated Steel, manufactured by Superneer Limited. It has a length of 3/4 inches and is commonly used in electronics, watches, precision instruments, and 3D printers.

The EFPP1007Z screw features thread size 10-32, length of 3/4 inches, head type Pan Head (head diameter 0.373-0.357” inches), drive type Phillips (drive size PH No.2), and is made of Blue Zinc Plated Steel.

The EFPP1007Z screw is made of Blue Zinc Plated Steel. Superneer provides material test reports (MTR) and RoHS compliance certificates for all products. Blue Zinc Plated Steel offers excellent corrosion resistance and mechanical strength.

The EFPP1007Z screw has a 10-32 thread. This is a UNC (Unified National Coarse) thread with 10-32 specification, widely used in North American applications.

EFPP1007Z Pan Head head Phillips drive screws are used in electronics assembly, PCB mounting, precision instruments, watches, 3D printers, optical devices, medical equipment, and consumer products where reliable fastening with Pan Head head aesthetics is required.

The minimum order quantity (MOQ) for EFPP1007Z is 10,000 pieces. The unit price is $0.033 USD for MOQ quantity. Larger quantities receive discounted pricing. Contact [email protected] for custom quotes.

The lead time for EFPP1007Z is 15-25 days for production. Shipping to USA takes 5-15 days via sea freight, with shipping cost starting from $50 USD. Air freight is available for urgent orders. DDP and FOB terms are both available.

The 10-32 thread is approximately equivalent to M5 (approx). When substituting inch screws with metric screws, always verify the actual diameter and pitch compatibility.

The EFPP1007Z uses a Pan Head head type. Pan Head head provides a specific head design optimized for its intended application. This head type is selected based on the specific application requirements for load distribution, aesthetics, and accessibility.

To choose the right screw: 1) Determine the required thread size based on the tapped hole or nut; 2) Select the appropriate length based on the material thickness; 3) Choose the head type based on clearance and aesthetics; 4) Select the drive type based on torque requirements; 5) Choose the material based on environmental conditions. For EFPP1007Z (10-32, 3/4 inches), ensure your application requires this specific size.

EFPP1007Z uses Blue Zinc Plated Steel finish, while alternative variants in the same thread/length specification include EFPP1007S (SUS304 Stainless Steel), EFPP1007B (Black Zinc Plated Steel). The Blue Zinc Plated Steel of EFPP1007Z is specifically selected because it offers moderate corrosion resistance with a distinctive blue iridescent appearance, commonly used in automotive assembly, machinery, and general industrial fastening. This distinction makes EFPP1007Z the preferred choice when these properties align with your application requirements.