8-32 x 1/2" Pan Head Pozi SEMS Screws with Spring and Flat Washer Steel Blue Zinc Plated

EDPZ0808Z is a 8-32 Pan Head head Torx drive screw made of Blue Zinc Plated Steel, manufactured by Superneer Limited. It has a length of 1/2 inches and is commonly used in electronics, watches, precision instruments, and 3D printers.

The EDPZ0808Z screw features thread size 8-32, length of 1/2 inches, head type Pan Head (head diameter 0.322-0.306 inches), drive type Torx (drive size PH No.2), and is made of Blue Zinc Plated Steel.

The EDPZ0808Z screw is made of Blue Zinc Plated Steel. Superneer provides material test reports (MTR) and RoHS compliance certificates for all products. Blue Zinc Plated Steel offers excellent corrosion resistance and mechanical strength.

The EDPZ0808Z screw has a 8-32 thread. This is a UNC (Unified National Coarse) thread with 8-32 specification, widely used in North American applications.

EDPZ0808Z Pan Head head Torx drive screws are used in electronics assembly, PCB mounting, precision instruments, watches, 3D printers, optical devices, medical equipment, and consumer products where reliable fastening with Pan Head head aesthetics is required.

The minimum order quantity (MOQ) for EDPZ0808Z is 10,000 pieces. The unit price is $0.035 USD for MOQ quantity. Larger quantities receive discounted pricing. Contact [email protected] for custom quotes.

The lead time for EDPZ0808Z is 15-25 days for production. Shipping to USA takes 5-15 days via sea freight, with shipping cost starting from $50 USD. Air freight is available for urgent orders. DDP and FOB terms are both available.

The 8-32 thread is approximately equivalent to M4 (approx). When substituting inch screws with metric screws, always verify the actual diameter and pitch compatibility.

The EDPZ0808Z uses a Pan Head head type. Pan Head head provides a specific head design optimized for its intended application. This head type is selected based on the specific application requirements for load distribution, aesthetics, and accessibility.

To choose the right screw: 1) Determine the required thread size based on the tapped hole or nut; 2) Select the appropriate length based on the material thickness; 3) Choose the head type based on clearance and aesthetics; 4) Select the drive type based on torque requirements; 5) Choose the material based on environmental conditions. For EDPZ0808Z (8-32, 1/2 inches), ensure your application requires this specific size.

EDPZ0808Z uses Blue Zinc Plated Steel finish, while alternative variants in the same thread/length specification include EDPZ0808S (SUS304 Stainless Steel), EDPZ0808B (Black Zinc Plated Steel). The Blue Zinc Plated Steel of EDPZ0808Z is specifically selected because it offers moderate corrosion resistance with a distinctive blue iridescent appearance, commonly used in automotive assembly, machinery, and general industrial fastening. This distinction makes EDPZ0808Z the preferred choice when these properties align with your application requirements.